How to reset your unit, How to forcibly eject a disc, English 3 – JVC DVD/CD Receiver KD-DV7401 User Manual

Page 3

Advertising
background image

ENGLISH

3

How to reset your unit

Your preset adjustments will also be erased (except the

registered Bluetooth device, see pages 28 and 29).

How to forcibly eject a disc

“Please Eject” appears on the display.

Be careful not to drop the disc when it ejects.
If this does not work, reset your unit.

WARNINGS:
(To prevent accidents and damage)

• DO NOT install any unit or wire any cable in

a location where;

– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety

devices such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.
• If you need to operate the unit while

driving, be sure to look around carefully.

• The driver must not watch the monitor

while driving.

If the parking brake is not engaged,

“DRIVER MUST NOT WATCH THE MONITOR
WHILE DRIVING.” appears on the monitor,
and no playback picture will be shown.

– This warning appears only when the

parking brake lead is connected to the
parking brake system built in the car
(refer to the Installation/Connection
Manual).

For security reasons, a numbered ID card is provided
with this unit, and the same ID number is imprinted on
the unit’s chassis. Keep the card in a safe place, as it will
help the authorities to identify your unit if stolen.

For safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.

EN02-09_KD-DV7402_001A_f.indd 3

EN02-09_KD-DV7402_001A_f.indd 3

2/22/08 9:15:56 AM

2/22/08 9:15:56 AM

Advertising
This manual is related to the following products: