Jaguar XF - Manual (Page 5)

Operating note
A seat position will only be memorised during
the five second period that the LED is
illuminated.
Any existing settings will be over-written when
programming a memory position.
5
Windows and door mirrors
Driving position memory
Windows
The windows can be fully opened or closed with
a single operation of the switch.
• To open a window, briefly press the
respective switch 1.
• To close a window, briefly pull the switch up.
• Operate the switch again to stop window
movement.
Door mirror adjustment
Press the left or right button 2 to select a
mirror. Use the four-way switch 3 to adjust the
position of the selected mirror.
Mirror dip when reversing
Reverse dip can be enabled or disabled via the
touch screen. From the Home screen, select
Vehicle, then Veh. settings, then Parking.
3
2
1
Driver's seat
When you have found your ideal driving
position, the vehicle can memorise the settings
for future use.
1. Press the SET button located in the driver’s
door storage area. The red LED will
illuminate for a five second period.
2. While the LED is illuminated, press button 1
or 2 to memorise the current settings.
The LED will extinguish and a chime will sound
to confirm that the settings have been
memorised. If the ignition is on, the message
center will display a confirmation message.
Recalling a seat position
Press and hold button 1 or 2 until the seat has
finished moving.
When enabled and reverse gear is selected, the
mirrors will automatically dip. Adjust the mirror
position with switch 3. Subsequently, each time
reverse gear is selected, your set position will
be automatically selected.
JJM 18 96 40 901:XF NAS 04/03/2008 10:02 Page 5