GE 94925 GE Universal Remote - Manual (Page 17)

16
Programming With Code Search
If your TV, VCR, DBS Satellite System, Cable
Box or Audio System does not respond after
you have tried all the codes for your brand,
or if your brand is not listed, try searching
your code by following the steps below:
1. Manually turn on the device you wish to
program.
2. Press and hold the
CODE SEARCH until
the INDICATOR LIGHT
lights, then release CODE
SEARCH.
3. Press and release
the device button for
the device you are
programming. The
INDICATOR LIGHT will
blink
once, then remain lit.
NOTE: For AUX program-
ming (when not an audio
code) press AUX followed
by the device button.
4. Press and release
ON•OFF until your device
turns off.
5. When your device turns off, press
ENTER, the INDICATOR LIGHT will turn
off.