JVC DR-M70SU - Manual (Page 32)

32 EN
OPEN/
CLOSE SET UP
STANDBY/ON
REPEAT
ZOOM
CH
RETURN
MENU/LIST TOP MENU
CLEAR AUDIO
PL AY SLOW SLOW
PAUSE REC STOP
VCR Plus+
PROG
ON SCREEN
ABC .@/: DEF
JKL GHI MNO
TUV PQRS W X YZ
1
4
7
2
5
8
0
3
6
9
ENTER
REC SPEED REC MONITOR
Recording
One-touch Timer Recording
Note
• The remaining recording time
will appear on the display
panel during an one-touch
Timer Recording. Press
[ON SCREEN] to see it on
the TV screen.
• You cannot pause a one-touch
Timer Recording.
• Unlike a Timer Recording, you
can perform the following
operations during a one-touch
Timer Recording.
- Turning off the power.
- Using [REC I] and
[STOP C].
• The unit will be turned off
automatically under the follow-
ing conditions.
1)No space remained on the disc.
2)When a power failure occurs.
• When OTR is finished and the
power is turned off, the unit
will switch to the standby
mode automatically if a Timer
Recording has been pro-
grammed.
Press [STANDBY/ON y
y /I]
to cancel the standby mode for
using the unit continuously.
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc has
enough recordable space for the
time you set.
After finishing the recording, the
recorder automatically goes into
standby.
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
2
Using [REC SPEED], select a
recording speed.
Refer to “Recording speed” on
page 26.
3
Make sure that the recording
format is set to the desired
mode.
Refer to “Formatting a disc” on
pages 28-29.
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from the Setting menu.
“Video mode” has been selected
as the default. Refer to page 28
“Choosing the recording format
of a blank disc.”
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
4
Using [CH + / -] or the
Number buttons, select a
desired channel to record.
5
Press [REC I] repeatedly to
select a desired recording
time.
Recording time appears on the TV
screen (30 minutes to 4 hours).
Recording will start.
When the unit reaches the speci-
fied time, it will turn off automati-
cally.
To change the recording time dur-
ing the one-touch Timer
Recording, press [REC I]
repeatedly until the desired time
appear.
To cancel the one-touch Timer
Recording within the specified
time, press [STOP C].
This operation may take a
while to be completed.
0:30
(Normal Recording)
OFF
4:00 3:30
1:00
I 0:30
This operation may take a
while to be recognized.
DVD-R DVD-R DVD-RW DVD-RW
VR
DVD-RW DVD-RW
Video
4
2
5
E6751CD_EN1.qxd 05.7.19 5:27 PM Page 32