JVC CA-D672TR - Manual (Page 8)

4
English
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the FM Antenna
A. Using the Supplied Wire Antenna
The FM Wire Antenna provided can be connected to a FM 75-ohm COAXIAL as
temporary measure.
Extend the supplied wire antenna horizontally.
B. Using the Coaxial Type Connector (Not Supplied)
A 75-ohm antenna with coaxial type connector (DIN 45325) should be connected
to the FM 75-ohm COAXIAL terminal.
A
ANTENNA
GND
AM EXT
B
ANTENNA
GND
AM EXT
CAUTION: To avoid noise, keep antennas away from metallic parts of the CA-D672TR, connecting cord and the AC power cord.
FM Wire Antenna
ANTENNA
FM 75
COAXIAL
AM
LOOP
GND
AM
EXT
Outside FM antenna wire
If reception is poor,
connect the outside
antenna.
Before attaching a
75 ohm coaxial lead
(the kind with a
round wire going to
an outside antenna),
disconnect the
supplied FM Wire
Antenna.
Connecting the AM (MW/LW) Antenna
Note: Even when connecting
an outside AM antenna,
keep the indoor AM loop
connected.
AM Loop Antenna
Turn the loop until you
have the best reception.
Snap the tabs on the loop
into the slots of the base to
attach the AM Loop.
AM
LOOP
GND
AM
EXT
1 2 3
If reception is poor, connect the outside antenna. AM antenna wire (Not supplied)
EN01-42.CA-D672TR[E]/F 05.3.24, 9:20 PM 4