JVC LYT0119-001A - Manual (Page 20)

EN
19
q
Procedure from Picture Data Transmission to Printing
The picture data sent from the digital still camera is automatically printed. The PRINT lamp
lights and blinks as indicated below until printing is finished.
1 PICTURE DATA BEING TRANSMITTED
FROM CAMERA TO PRINTER
2 PRINTER CONVERTING THE PICTURE
DATA AFTER TRANSMISSION
• This may take several minutes depending on
the machines in use or the volume of data
transmission.
3 DATA CONVERSION FINISHED
• Printing automatically starts with the paper
tray loaded.
4 PRINTING FINISHED
• The picture data is being stored in memory as
long as the PRINT lamp is lit. Every pressing
of the PRINT button produces a print copy of
the same picture.
• When you want to print another picture,
repeat the steps 2 and 3 on the previous page.
• Data communications may be variable or
impossible depending on the lighting
condition, battery consumption,
communications distance and sending and
receiving angles.
IrDA
Lighting Blinking
PRINT
DV ON LINE
IrDA
Blinking slowly
PRINT
DV ON LINE
IrDA
Lighting Lighting
PRINT
DV ON LINE
IrDA
Lighting Blinking slowly
PRINT
DV ON LINE