JVC Compact Component System CA-MXK1R User Manual

Page 18

Advertising
background image

15

Using the CD Player

English

Engl

ish

English

English

Engli

s

h

English

Engl

ish

LVT0686-009B / CA-K1R/CA-K3R(B) / English

Example of indication:

One Touch Play

The power comes on, and operations are done automatically.
❏ By pressing the CD

6 button, the System will come on, and if

a CD is loaded for the disc number that was lastly selected, it
will start playing from the first track.

❏ By pressing the CD1-CD3 button, the System will come on, and

if a CD is already loaded for the selected disc number, it will
start play from the first track.
• If no CD is loaded for the selected disc number, the next disc

number will be automatically selected.

To Load CDs

1

Press the CD Open/Close

0

button on the

Unit to open the tray.

2

Place a CD, with its label side up, onto the
tray.

Be sure that the CD is securely seated on the disc tray.

3

Press the DISC SKIP button on the Unit and
place the next CD.

When you press the button, the tray turns for the next CD.

4

Repeat step 3 for the last CD.

5

Press the CD Open/Close

0

button on the

Unit.

The tray is closed.

❏ When you use an 8 cm (3'') CD, place it on the inner circle of the

tray.

❏ You can load CDs while listening to the other source.
❏ When power is turned off with the tray opened, the tray is auto-

matically closed.

❏ If the CD cannot be read correctly (because it is scratched, for

example), “ 0 0:00” appears on the display.

To Unload CDs

Take out the CD as shown below.

1

While the CD Player is stopped, press the CD
Open/Close

0

button on the Unit to open the

tray.

2

Remove the CD, then press the DISC SKIP
button on the Unit.

The tray turns for the next CD.

3

Repeat step 2 to remove all the CDs.

4

Press the CD Open/Close

0

button on the

Unit to close the tray.

❏ You can remove CDs while listening to the other source.

• You can also remove the CDs during playback. However,

in this case, you can only remove the CDs that are not be-
ing played back.

1

2

3

When CD door has ejected once and then
CD-1 is pressed. (DISC1 is selected)

Shows that this disc number is selected.

Shows that the disc is rotating.

With the label side up

MX-K1R&MX-K3R(B).book Page 15 Friday, March 23, 2001 9:49 AM

Advertising
This manual is related to the following products: