Janome MEMORY CRAFT 9500 - Manual (Page 8)

7
Function Buttons
1 Start/Stop Button
Press this button to start or stop the machine. This
button can be used either in the Ordinary Sewing
Mode or Embroidery Mode. In the Ordinary Sewing
Mode, the machine starts running slowly for the first
few stitches, it then runs at the speed set by the
Speed Control Lever.
NOTE:
The Start/Stop Button cannot be used when the foot
control is connected to the machine.
2 Reverse Button
When stitch pattern 1, 2, 6 or 7 has been
selected, the machine will sew in reverse while the
Reverse Button is being pressed.
If you press the Reverse Button when sewing all other
stitches, the machine will immediately sew locking
stitches and automatically stop.
3 Auto-Lock Button
When stitch pattern 1, 2, 6 or 7 has been
selected, the machine will immediately sew locking
stitches and automatically stop when the Auto-Lock
Button is pressed.
When sewing all other stitches, the machine will sew
locking stitches at the end of the current pattern and
automatically stop.
4 Up/Down Needle Button
Press this button to bring the needle bar up or down.
5 Speed Control Lever
See page 8.
1
2
3
4
5
01 02 06 07
01 02 06 07