JVC CA-FSGD7 - Manual (Page 20)

16
Making DVD Voice Clear—CLEAR VOICE
This function allows you to easily understand the dialog of
DVD even with the volume turned down.
• This function only works for center-channel signal
encoded multi-channel disc.
Presetting Automatic DVD Sound Increase
Level—DVD LEVEL
The DVD sound is sometimes recorded at a lower level than
for other discs and sources. You can set the increase level for
the currently loaded DVD.
• Once the current DVD is ejected, this setting is canceled
and set automatically to “NORMAL.”
Changing the Display Brightness—DIMMER
You can dim the display window.
Remote Control:
Main Unit:
Changing the Picture Tone—VFP (Video
Fine Processor)
While showing a playback picture on the TV screen, you can
select the preset picture tone, or adjust it and store your own
likeliness.
To select a preset picture tone
1 Activate VFP.
2 Select a preset picture tone.
NORMAL Original recording level.
MIDDLE Output level is increased (less than “HIGH”).
HIGH Output level is increased (more than
“MIDDLE”).
Remote
ONLY
Canceled
Remote
ONLY
NORMAL MIDDLE
HIGH
(at the same time)
DIM 1 Dims the display.
DIM 2 Erases the display illumination.
AUTO DIM Erase the display illumination when
disc playback starts.
• This function works only when playing
DVD/VCD/SVCD or JPEG files.
• The display illuminates when
playback stops.
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings (see next page).
DIM 1 DIM 2
AUTO DIM DIM OFF
(Canceled)
(at the same time)
DIM 1 DIM 2
AUTO DIM DIM OFF
(Canceled)
Remote
ONLY
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
On the TV screen
NORMAL CINEMA
USER2 USER1
FS-GD7[J]_EN.book Page 16 Thursday, March 10, 2005 9:41 AM