JVC HR-J6003UM - Manual (Page 35)

35
SPECIAL FEATURES
TV Multi-Brand Remote
Control
The VCR's remote control can control several functions on JVC
remote control TVs and on the brands of remote control TVs
listed below. Some TV brands have more than one code. If the
TV will not function with one code, try entering another.
TURN ON THE TV
1
Turn the power on using the TV's remote control.
SET REMOTE CONTROL
MODE
2
Set the TV/VCR switch on the VCR's remote control to
TV.
SET TV BRAND CODE
3
Refer to the chart below. While holding down POWER,
enter your TV’s brand code using the NUMBER keys,
then press STOP.
● Once you have set the remote control to operate the
TV, you don’t have to repeat this step until you
replace your remote control’s batteries.
OPERATE TV
4
First, press POWER on the remote to see if the TV’s power
goes off as it should. If it does, try other operations.
● The POWER, TV/VIDEO, CH5∞, VOL +/– and
NUMBER keys on the remote can all be used to
operate the TV. *For some brands of TV, you must
press ENTER after having pressed the NUMBER keys.
● To return the remote to VCR control, set the TV/VCR
switch to VCR.
NOTE:
Depending on the kind of TV, there may be cases where some
or all functions cannot be operated using the remote control.
TV BRAND NAME BRAND CODE
JVC 01
PHILIPS 03
PHILICO/HITACHI 05
SHARP 06
TOSHIBA 07
MITSUBISHI 08
PHILICO/DAEWOO 09
PACKARD BELL 09
KIOTE/DAEWOO 09
DAEWOO 10
SAMSUNG 11
GOLDSTAR 12
RCA 14
PANASONIC 15, 16
SONY 18
ZONDA 19, 20, 21
AKAWA 21, 22
ELECTRA 23
PHILICO 25
1 2 3
4 5 6
7 8 9
0
1 2 3
4 5 6
7 8 9
0
POWER
NUMBER
ENTER
TV/VCR
CH
VOL. +/-
TV/VIDEO
STOP