JVC KS-FX270 - Manual (Page 14)

14
ENGLISH
Using the Sound Control Memory
You can select and store a preset sound adjustment suitable to each playback source.
(Advanced SCM)
Selecting and storing the sound modes
Once you select a sound mode, it is stored in memory, and will be recalled every time you
select the same source. A sound mode can be stored for each of the following sources —
FM1, FM2, FM3, AM, Tape, CD-Changer and external components.
• If you do not want to store the sound mode separately for each playback source, but want
to use the same sound mode for all the sources, see “Canceling Advanced SCM” on page
16.
1
Select the sound mode you want.
Each time you press the button, the sound mode changes
as follows:
• When “SCM LINK” is set to “LINK ON”, the selected sound
mode can be stored in memory for the current source and
the effect applies only to the current source. Each time
you change the playback source, the SCM indicator flashes
on the display.
• When “SCM LINK” is set to “LINK OFF”, the selected sound
mode effect applies to any source.
Indication For: Preset values
Bass Treble Loudness
SCM OFF (Flat sound) 00 00 On
BEAT Rock or disco music +02 00 On
SOFT Quiet background music +01 –03 Off
POP Light music +04 +01 Off
“SCM” indicator
1
EN12-17.KS-FX270[J]/f 10/27/00, 3:54 PM 14