Jensen HD5313IR - Manual (Page 10)

6
HD5313
Preset Stations
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Hold a preset button (13-18)
for three seconds. The preset number will appear in the display.
NOTE: HD Radio multicast channels can be stored as preset stations.
Recall a Station
Select a band (if needed). Press a preset button (13-18) to select the
corresponding stored station.
Scan
Press the SCAN button (21) to scan the current AM or FM band. The unit
will pause for 5 seconds at each station. Press the SCAN button again to
stop scanning when the desired station is reached.
Broadcast Information
During HD Radio broadcasting, available broadcast information will
automatically appear on the LCD. Press the DISP button (7) multiple times
to view broadcast information in the following order:
• Band/Frequency
• Station Call Letters
• Song
• Artist
• RDS Category
The information will scroll across the screen if longer than 8 characters.
NOTE: The amount of information displayed when receiving an HD
Radio signal is dependent upon what is being broadcast. Some
stations broadcast their call letters (name), the artist's name, song
title, and category of music.
iTunes
®
Tagging
The HD5313 offers iTunes ® Tagging, which allows the user to "Tag" songs
playing on HD Radio™ stations for purchase later through iTunes. When
the TAG button (23) is pressed, the unit stores the title and artist song
information that can then be transferred to your iPod when connected to the
USB connector. A list titled "Tagged" will appear in iTunes, allowing you the
option to purchase your tagged songs.
iPod Compatibility
Models supported, but not limited to, include the following
• iPod Nano 4G
• iPod Classic
• iPod Touch
• iPod Nano 3G
Tagging Music
To begin tagging music, tune to an HD Radio station. The “TAG” icon must
be illuminated, indicating a digital station is being received. Press the TAG
button. The song information is saved to the head unit memory until an iPod
is connected. When the tag is successful, the screen displays “TAG SENT”.
You can tag up to 50 songs before the tags must be transferred to an iPod
or deleted. When the Tag memory reaches capacity (50 tags) the screen
displays “STORED FULL”.
HD5313
PRESS AND HOLD
PRESET NUMBER APPEARS
Table 1: TAG Messages
Tag Message Reason
TAG NOT AVAILABLE Make sure HD Radio signal is being received.
ALREADY STORED Song has already been tagged. You cannot save
the same song twice unless you tag it on a differ-
ent station.
IPOD ERR iPod error. Check iPod.
TRANSFER FAILED Error sending tags to the iPod. Make sure iPod is
powered on and reconnect until “TAG SENT” is
displayed.