Jwin JX-CD3150D - Manual (Page 13)

12
PROGRAMMED Playback
This feature allows you to program up to 20 tracks on a disc for playback in any
desired order.
Note: You cannot program tracks while a disc is playing. If the disc is playing
press the STOP button first before beginning the programming steps below:
1.) Press the PROGRAM button to enter the Program
Mode. The PROGRAM indicator and Program
Number ‘0’ flash.
2.) Press the SKIP or button to select the first
track number you wish to enter in the program
memory.
Example: Track Number 8.
3.) When the desired track number appears on the
display, press the PROGRAM button again to enter
that track in memory.
The Program Number display returns to flashing “0”.
4.) Repeat Steps 2-3, selecting a different track number each time until you have
entered up to 20 tracks in the program memory.
Note: You may program the same track number to
play multiple times in the program sequence if
desired. When programmed track is full, “ – – ”
flashes in the display.
5.) Press the PLAY/PAUSE button to begin
Programmed Playback. The PROGRAM indicator
flashes. Playback will begin with the first track you
programmed and will continue until the last
programmed track has played.
FM STEREO
PLAY/PAUSE
PROGRAM
REPEAT
FM STEREO
PLAY/PAUSE
PROGRAM
REPEAT
FM STEREO
PLAY/PAUSE
PROGRAM
REPEAT
FM STEREO
PLAY/PAUSE
PROGRAM
REPEAT
FM STEREO
PLAY/PAUSE
PROGRAM
REPEAT
MS7616_061404.p65 14/6/2004, 10:59 14