JVC CA-MXKA3 - Manual (Page 9)

7
Basic Operations
)
Turning the Power On and Off
Turning the System On
1 Press the
%
STANDBY/ON button.
The display comes on and “WELCOME” is displayed once.
The STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in
when the power was last turned off.
• For example, if the last thing you were doing was listening
to a CD, you are now ready to listen to a CD again. If you
wish, you can change to another source.
• If you were listening to the Tuner last, the Tuner comes on
playing the station it was last set to.
Turning the System Off
1 Press the
%
STANDBY/ON button again.
“GOOD BYE” is displayed and the display goes out, except
for the clock display. The STANDBY indicator lights up. (The
display is dimmed.)
• Some power is always consumed even though power is
turned off (called Standby mode).
• To switch off the System completely, unplug the AC power
cord from the wall outlet. When you unplug the AC power
cord, the clock will be reset to 0:00 immediately.
Adjusting the Volume
Turn the VOLUME control on the Unit clockwise to increase the
volume or turn it counterclockwise to decrease the volume.
Press the VOLUME + button on the Remote Control to increase
the volume or press the VOLUME – button on the Remote Control
to decrease the volume.
You can set the volume level to MIN, 1-31, or MAX.
CAUTION:
• DO NOT turn on the System and/or start playing
any source without first setting the VOLUME
control to minimum, as a sudden blast of sound
could damage your hearing, speakers and/or
headphones.
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers.
Be sure to turn down the volume before connecting or putting on
headphones.
SOUND
MODE
ACTIVE
BASS EX.
VOLUME +,–
Numeric
keys
% STANDBY/ON
Display
STANDBY indicator
PHONES
ACTIVE BASS EX.
% STANDBY/ON
SOUND MODE
VOLUME
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
BASS indicator
Sound Mode indicator
Various information
Level bar
Status bar (Indicates various statuses.)
FADE MUTING
SOUND
TURBO
SOUND TURBO
SOUND TURBO indicator
STANDBY/ON
STANDBY
STADBY/ON
or
STANDBY/ON
STANDBY
STADBY/ON or
MX-KA3[UJ].book Page 7 Wednesday, March 12, 2003 10:38 AM