JVC XV-D705GD - Manual (Page 18)

16
Getting started
XV-D705GD/XV-D703TN
LET0142-003A
[2U, 3U, 4U, US, UB, UT] EN
VIDEO
AUDIO
RIGHT
LEFT
IN
S-VIDEO
VIDEO S-VIDEO
AV COMPU LINK
VIDEO OUT
PCM/DOLBY DIGITAL
OPTICAL COAXIAL
DIGITAL OUT
LEFT
RIGHT
ANALOG OUT
2CH FRONT REAR CENTER
SUBWOOFER
NTSC
PAL
OFF ON
ATTENUATOR
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you wish to connect.
To connect to a TV, monitor, or projector with the audio input and video input
jacks
You can enjoy using the unit by simply connecting it to a television set. To hear improved audio sound quality,
connect the audio outputs to your audio equipment. (See the following pages.)
Connections
Before using the unit, you have to connect the unit to a TV or amplifier. By connecting to an amplifier which has a
digital terminal or Dolby digital capability, you can enhance the sound quality.
Connect the unit to a television set equipped with stereo audio input and video input jacks using the supplied audio/
video cables.
• If your television set has a monaural audio input instead of stereo, you need to use an optional audio cable which
converts stereo audio output to monaural.
• If your television set has an S-video input, you should connect it with the S-VIDEO output of the unit using the
supplied S-video cable in addition to the (standard) video connection to get better picture quality.
The unit is compatible with the PAL and NTSC color systems. Set
NTSC
PAL according to the color system of your TV,
monitor, or projector. (Make sure the color system of the DVD disc labeled of the package. If you play the disc
recorded on the different color system, the unit play it incorrectly. Use the disc recorded of the same color system.)
When you use the multi-system TV, monitor, or projector, you can play the disc recorded on both the PAL and NTSC
color systems. Set
NTSC
PAL
according to the color system of the disc.
The
ON
ATTENUATOR
OFF
beside the AUDIO OUT jacks should be normally set to OFF. If you hear the audio distorted because the
sensitivity of the TV’s audio input is too high, set ON
ATTENUATOR
OFF to ON.
NOTE
¶
Connect VIDEO OUT of the unit to the video input of a television set. Connecting VIDEO OUT of the unit to a TV
via a VCR may cause a monitor problem when playing back a copy-protected disc.
Audio/video cable
(supplied)
S-video cable
(supplied)
The unit
TV, monitor, or projector
White
Red
Yellow
Red
White
Yellow
* If the TV has an AV COMPU LINK terminal, see “AV
COMPU LINK remote control system” on page 104.