Connecting other equipment – JVC CA-FSH30 User Manual

Page 11

Advertising
background image

8

Speaker grille

To remove the speaker grille, insert your fingers at
the top of the speaker grille, pull towards you. Then
pull the bottom towards you.

To attach the speaker grille, follow the illustration
above.

Connecting Other Equipment

To connect an audio equipment

You can connect audio equipment—used only as a
playback device.

• DO NOT connect any equipment while

the power is on.

• DO NOT plug in any equipment until all

connections are complete.

Be sure that the plugs of the audio cords are colored:
White plugs and jacks are for left audio signals, and
red ones for right audio signals.

Holes

Projections

To remove the speaker grilles

The speaker grilles are removable.

L

R

L

R

To audio output

Audio equipment

NOW you are ready to plug in the unit
and any other connected equipment.

IMPORTANT: Be sure to check all connections to
be done before plugging the power cord.

This unit can be supplied with power through the AC
IN connector (at home) or the DC IN connector (in a
car).
• Do not connect the unit using the AC IN connector

and the DC IN connector at the same time for safe
and correct use.

To connect the AC power cord

Connect the AC power cord to the AC IN connector
and a wall outlet.

Continued

For playing other equipment through this unit,
connect between the audio output jacks on the other
equipment and AUX jacks by using audio cords (not
supplied).

A C I N

AC power cord (supplied)

EN01-13_FS-H30[J]f.pm6

03.2.6, 4:34 PM

8

Advertising