Receiving fm stations with rds, Using the tuner – JVC CA-MXK10R User Manual

Page 14

Advertising
background image

11

Using the Tuner

Receiving FM Stations with
RDS

You can use the RDS (Radio Data System) by using the buttons on
the Unit or the Remote Control.
RDS allows FM stations to send additional signals with their reg-
ular program signals. For example, the stations send their station
names, and information about what type of program they broad-
cast, such as sports or music, etc. This unit can receive the follow-
ing types of RDS signals:
PS (Program Service):
shows commonly known station names.
PTY (Program Type):
shows types of broadcast program.
RT (Radio Text):
shows text messages the station sends.
What information can RDS signals provide?
The display shows RDS signal information that the station sends.

To show the RDS signals on the display

Press the DISPLAY MODE button while listening to an
FM station.
Each time you press the button, the display changes to show infor-
mation in the following order:

PS (Program Service):
While searching, “PS” alternately appear on the display. Then, the
RDS indicator lights up and the station name appears. “NO PS” ap-
pears if no signal is sent.
PTY (Program Type):
While searching, “PTY” alternately appear on the display. Then,
the RDS indicator lights up and the broadcast program type ap-
pears. “NO PTY” appears if no signal is sent.
RT (Radio Text):
While searching, “RT” alternately appear on the display. Then, the
RDS indicator lights up and a text message sent by the station ap-
pears. “NO RT” appears if no signal is sent.
Station Frequency:
Station frequency (non-RDS service)

• If searching finishes at once, “PS”, “PTY” and “RT” will not

appear on the display.

• If you press the DISPLAY MODE button while listening to

an AM (MW/LW) station, the display only shows station
frequency.

• RDS is not available for AM (MW/LW) broadcasts.

On characters displayed
When the display shows PS, PTY or RT signals:
• The display shows upper case letters only.
• The display cannot show accented letters; For example, “A”

may represent accented “A’s” like “Б, В, Г, А, Д and Å”.

[Example of characters displayed]

DISPLAY

MODE

DISPLAY MODE

PS

PTY

RT

Frequency

or

!

MX-K10R&MX-K30R(B).book Page 11 Wednesday, February 20, 2002 11:42 AM

Advertising