Viewing high quality images, Change output resolution during stop mode, Select “yes – JVC CU-VD40U User Manual
Page 19
19
EN
FR
ES
Viewing High Quality Images
You can change the video output resolution when the burner is connected to a progressive scan TV
via an HDMI cable or component video cable.
A
Change output resolution during
stop mode.
z
Every press of the button changes the resolution as
follows.
Connection via HDMI cable (However, the selections
for resolution not supported by TV may not be
displayed.)
Connection via component video cable (HDMI cable
is not connected)
Connection via video cable
Set the resolution to “480i”. Image cannot be
displayed if other settings are being selected. Press
the [RESOLUTION] button and set to “480i”.
B
Select “YES”.
z
If the image is not displayed on the TV after changing
the resolution, do not operate the burner for 15
seconds. The resolution setting before the change is
restored.
NOTES:
z
When HDMI cable is connected, images are not output in
analog.
z
When “480i” is selected, images are output from both the
VIDEO connector and the COMPONENT VIDEO OUT
connectors.
CAUTION:
z
“AUTO” will be selected automatically when the burner is
connected via an HDMI cable to a TV not supporting the
selected resolution.
z
When the burner is connected to a TV via a component
video cable and the output resolution is set to “1080i” or
“720p”, playback will stop if a digital copy protected (CSS)
disc is played. (0P24)
AUTO
480p
1080i
720p
480i
480p
1080i
720p
YES
CURRENT RESOLUTION : 480i
DO YOU WANT TO SAVE THE SETTINGS?
NO
1. SELECT
2. CONFIRM
CU-VD40U_EN.book Page 19 Monday, June 4, 2007 4:22 PM