JBL Balboa SUB10 User Manual
Page 2
- CONTENTS -
BASIC SPECIFICATIONS …………….……..…………..1
PACKING……..………………….….….…………..……...2
DETAILED SPECIFICATIONS ……….……..…………..3
CONNECTIONS………………………...……..…...…..…5
OPERATION ……..………………….……...…….….…...7
TEST SET-UP AND PROCEDURE….…………………..8
EXPLODED VIEW/PARTS LIST…………………………9
AMPLIFIER BLOCK DIAGRAM…………………………10
DETAILED TROUBLESHOOTING……………………..12
ELECTRICAL PARTS LIST ..……….……….……….…13
P.C.B. DRAWINGS……………………………………….17
IC/TRANSISTOR PINOUTS..……..….…….….….….….23
SCHEMATICS……………………….……………………24
BALBOA SUB10 SPECIFICATIONS
Amplifier Power (RMS):
100 Watts
Peak Dynamic Power *:
225 Watts
Driver:
10"
(254mm)
Inputs:
Line Level and LFE
Crossover Frequency:
Variable from 50Hz to 150Hz, 24 dB per octave
Frequency Response:
30Hz – 150Hz
Dimensions (H x W x D):
19-3/4" x 14-1/16" x 14-3/4"
(502mm x 357mm x 375mm)
Weight:
35
lb/16kg
JBL continually strives to update and improve existing products, as well as create new ones. The
specifications and details in this and related JBL publications are therefore subject to change without notice.
* The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured across the output of
a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
BALBOA series SUB10
1