JVC CU-VD50U - Manual (Page 17)

EN
ES
17
o
Removing USB cable from PC
A Carry out removing of hardware on the PC.
B Remove the USB cable.
CyberLink Power2Go 5.5 Lite can be used on computers satisfying the following
conditions.
* If you use USB 1.1 cable, it will take approximately 3 hours to write one DVD.
• For details on using Power2Go, refer to the User’s guide, Help and
Readme files installed with the software. You can access the User’s
guide, Help and Readme files from the Start menu on the PC.
• To get customer support and to register the software, you need the
following product key (CD-Key):
PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS
• This burner cannot be used to write files into CD-R or CD-RW discs.
Refer to page 51 for the recommended discs.
• This burner does not response to all the functions of Power2Go 5.5 Lite.
• Power2Go 5.5 Lite does not support conversion of audio files to MP3
format.
• When the “Enter Activation Key” screen appears while using Power2Go
5.5 Lite, close the screen without entering the activation key.
• To play back disc created on a PC on this burner, follow the following
procedure.
Insert the disc into this burner. After disc recognition, press the
NAVIGATION/TOP MENU button to display the playback navigator.
(P. 23)
• For data disc created on a PC, the date and time displayed will not be
accurate.
Computers That Can Be Used
Operating
system
Windows ா XP Home Edition (pre-installed)
Windows ா XP Professional (pre-installed)
Windows Vista ீ Home Basic (32-bit edition, pre-installed)
Windows Vista ீ Home Premium (32-bit edition, pre-installed)
Connector USB 2.0/1.1 connector (*)
CPU
Intel ா Pentiumா III, at least 800 MHz
(Intel ா Pentiumா 4, at least 2 GHz recommended)
RAM At least 128 MB (at least 256 MB recommended)
Free hard disk
space At least 50 MB for installation
At least 5 GB recommended for creating DVDs
Display Must be capable of displaying 800 x 600 dots
Note
Caution
CU-VD50U.book Page 17 Tuesday, June 17, 2008 9:45 AM