John Deere STARFIRE PC20235 - Manual (Page 16)

Installation Instructions
OUO6050,00004FB –19–10DEC03–3/4
N64466
–UN–18DEC03
N64444
–UN–12DEC03
4. Attach receiver to bracket.
5. Connect STARFIRE harness to power harness.
CAUTION: Always attach harness to power
source before connecting STARFIRE receiver
harness. It is recommended to permanently
attach eyelet terminals to 12V battery. Use of
alligator type clips is not recommended as they
can expose operators to sparks.
6. Install battery harness to battery.
7. Attach GREENSTAR Display to harness.
8. Connect power harness to battery harness.
9. Use enclosed VELCRO straps to secure harness.
OUO6050,00004FB –19–10DEC03–4/4
N64463
–19–18DEC03
10. Go to SETUP/STARFIRE/PAGE3.
•
Set RTK Operating Mode to QUICK SURVEY
BASE.
•
Set RTK Network ID to match Vehicle Network ID.
NOTE: In QUICK SURVEY mode, base station
STARFIRE will automatically perform quick survey
and send differential corrections to RTK vehicle.
PC20235 (18DEC03)
14
Installation Instructions
121803
PN=16