JBL E250P - Manual (Page 8)

SPECIFICATIONS
© 2003 Harman International Industries, Incorporated
JBL is a registered trademark of Harman International Industries, Incorporated.
Part No. 350883-001
PRO SOUND COMES HOME ™
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
www.jbl.com
* Trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
All features and specifications are subject to change without notice.
E150P E250P
Amplifier
Power (RMS): 150 Watts 250 Watts
Peak Dynamic
Power † : 250 Watts 550 Watts
Driver: 10" PolyPlas ™ 12" PolyPlas ™
Inputs: Line Level (switchable to LFE) Line Level (switchable to LFE)
and Speaker Level with and Speaker Level with
5-way binding posts 5-way binding posts
Low-Pass
Frequency: Variable from 50Hz to 150Hz Variable from 50Hz to 150Hz
Frequency
Response: 27Hz – Low-pass 25Hz – Low-pass
crossover setting crossover setting
Dimensions
(H x W x D): 17-3/4" x 12-1/4" x 14-1/2" 19-3/4" x 14-3/8" x 16-1/2"
(451mm x 311mm x 368mm) (502mm x 365mm x 419mm)
Weight: 33.5 lb/15.2kg 43 lb/19.5kg
† The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured
across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz
sine wave burst, 3 cycles on, 17 cycles off.