JVC BR-HD50E - Manual (Page 80)

E-76
MENU SCREENS
Description of the Menu screens (continued)
The TC/UB/CLOCK Menu consists of the following two screens. (1/2 and 2/2)
„ TC/UB/CLOCK [1/2] Menu screen
TC/UB/CLOCK Menu screens
Item Setting Description
TCG SELECT
(0500) PRESET (00)
EREGEN (01)
For selecting the time code generator mode.
PRESET
: PRESET mode
REGEN : REGENERATION mode
NDF/DF [60]
(0501) NON DROP (00)
EDROP (01)
For selecting the framing mode of the time code generator.
(Only for U model)
* Select here in the PRESET mode.
NON DROP : NON-DROP mode
DROP
: DROP-FRAME mode
DF BIT [50]
(0502) OFF (00)
EON (01)
For selecting whether to record drop-frame bits. (Only for E
model)
(In DV format mode only)
OFF : No recording
ON
: Recording
TC DUPLI.: DV
(0503) EOFF (00)
AUTO (01)
NON DROP (02)
For selecting the type of time code to be recorded with DV signal
input (In DV format only).
OFF
: Records time code of the built-in time code genera-
tor of BR-HD50.
AUTO : Records the time code input to the IEEE1394 ter-
minal. The framing mode of the time code will be
set automatically to the framing of the time code
input.
NON DROP : Records the time code input to the IEEE1394 ter-
minal. The framing mode of the time code is fixed
to non-drop framing. (Only for U model)
Use this setting for dubbing tapes recorded with
BR-DV600, GY-DV500 or GY-DV550 in the NON-
DROP FRAME mode. (Only for U model)
TC OFFSET
(0504) EOFF (00)
+1F (01)
+2F (02)
–2F (03)
–1F (04)
For setting up the timing when time code data from the REMOTE
terminal of BR-HD50 to the editing remote controller are output.
OFF : Normal setting
+1F : Outputs time code data +1 frame.
+2F : Outputs time code data +2 frames.
–2F
: Outputs time code data -2 frames.
–1F : Outputs time code data –1 frame.
NEXT BACK For displaying the TC/UB/CLOCK [2/2] Menu screen.
PAGE BACK For returning to the TOP Menu screen.