JVC GNT0013-014A - Manual (Page 18)

16
Gettin
g started
Getting started
Connections
*In the following description, “TV” may be substituted with “monitor” or “projector.”
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
• Do not connect the AC power cord until all other connections have been made.
• Since different components have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs
to your separate audio equipment. (See the following pages.)
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable
(optional) in addition to the (standard) video connection to get better picture quality.
Enabling the S-VIDEO output or the VIDEO output
For your TV connection, you can use either the S-video output or the component video output.
When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the
rear panel to “S-VIDEO AND VIDEO”. ( For XV-S402SL, the VIDEO jack is enabled regardless of this switch position.)
Then, “S-VIDEO” appears on the display window for a few seconds.
Note that you must change the switch position while the unit is stopped or while the unit power is off with the DVD
removed. Otherwise, the changed setting is not effective.
Before making any connections
To connect to a TV
PCM / STREAM
COAXIAL
COMPONENT
S-VIDEO VIDEO RIGHT LEFT
Y PB PR
OPTICAL
VIDEO
AUDIO
RIGHT
LEFT
S-VIDEO
IN
Yellow
Audio/Video cable
(supplied)
White
Red
S-video cable
(not supplied)
The unit
Yellow White
Red
DIGITAL OUT VIDEO OUT
AUDIO OUT
AV COMPU LINK
S-VIDEO
AND
VIDEO
COMPONENT
AND
VIDEO
PAL NTSC
VIDEO OUT SELECT
For XV-S402SL
If the TV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function.
See “AV COMPU LINK remote control
system” on page 52 for details.
TV
: For XV-S402SL
VCDVD TITLE TRACK CHAP A-B 1
PROGRAM
RANDOM
GROUP
(Display Window)
;966/ $ B(QJERRN 3DJH  )ULGD\ 0DUFK     30