Using sleep timer, Timer priority – JVC CA-HXZ9V User Manual

Page 38

Advertising
background image

– 33 –

English

SLEEP 10

SLEEP 60

SLEEP 30

SLEEP 20

Canceled

SLEEP 120

SLEEP 90

To turn on or off Recording Timer after its setting
is done

1

Press CLOCK/TIMER repeatedly until
“REC” appears on the display.
The REC (Recording Timer) indicator starts
flashing on the display and the

(Timer)

indicator remains lit.

2

To turn off the Recording Timer, press
CANCEL/DEMO.
The REC (Recording Timer) indicator goes
off from the display (“REC OFF” appears on
the display for 2 seconds).
The Recording Timer is canceled, but the setting for the
Recording Timer remains in memory.

Or

To turn on the Recording Timer, press
SET/DISPLAY.
“OK

” appears on the display for 2 seconds.

The settings you have done are shown on the
display in sequence for your confirmation.

Using Sleep Timer

With Sleep Timer, you can fall asleep to music. You can set
Sleep Timer only while the unit is turned on.

How Sleep Timer actually works

The unit automatically turns off after the specified time
length passes.

On the remote control ONLY:

1

Press SLEEP.

The time length until the shut-off time
appears and the SLEEP indicator starts
flashing on the display.
• Each time you press the button, the time length changes

as follows:

• If the built-in clock has not been set, “CLOCK ADJUST”

appears on the display.

2

Wait for about 5 seconds after specifying the
time length.

The SLEEP indicator stops flashing and remains lit.

To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time (minute) until the
shut-off time appears for about 5 seconds.

To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.

Timer Priority

Since each timer can be set separately, you may wonder what
happens if the settings for these timers overlap.

Below are some examples.
Recording Timer has priority over Daily Timer and Sleep Timer.
• If Daily Timer is set to come on while Recording Timer is

operating, Daily Timer will not come on at all.

• If Recording Timer is set to come on while Sleep Timer is

operating, Sleep Timer will be canceled.

Recording Timer

Sleep Timer

Recording Timer

Daily Timer

6:00

6:30

7:00

7:30

does not work.

CLOCK

/ TIMER

CANCEL / DEMO

SET /

DISPLAY

SLEEP

21:00

21:30

22:00

22:30

canceled.

EN26-33.CA-HXZ7/9V[US,UN,UX]/1

22/1/03, 4:53 PM

33

Advertising
This manual is related to the following products: