Jensen SMPS-225 - Manual (Page 7)

6
PRODUCT OVERVIEW
Front View
Rear View
OPERATION GUIDE
1 . Make sure 4 pcs of “AAA” batteries (not included) are installed before using. See “Power
Sources” section above for details.
2. Slide the ON/OFF power switch (back of speaker) to the ON position.
3. The power indicator on the right speaker will light.
4. Turn on the external audio player that you want to
connect to the speaker and set the volume output to
a low setting.
5. Fully insert the audio input plug from the back of the
speaker into the headphone output jack of your
external audio player (MP3 player, iPod® or
iPhone™).
6. Adjust the speakers out or in to hold the player in
place.
7. Gradually increase the volume output of the attached player until the desired volume level
is reached.
8. Turn off the speaker by sliding the power switch to “OFF” position.
Audio Input Cord
with Plug
Battery Compartment
Cover
DC Input
Jack
Power ON/OFF
Switch