Return to normal screen, Check the results, Basic features 22 – JVC VIDEO PLUS HR-S6965EK User Manual
Page 22
basic features
22
set tape speed
You can change the tape speed between Standard Play (SP)
and Long Play (LP) by pressing /.
set channel position number
Make sure the channel position you wish to
record is displayed. If “
TV PROG
” displays “
– –
”, set the Channel Position number
correctly. Press
PR
or
PR
button to input the channel position number on
which your recorder receives the station. Then press
(or E).
set pdc mode
Press
PDC
(number key
7
) to change between
ON
and
OFF
.
Programme Delivery Control (
PDC
) is a service designed to ensure that timer
recording still works in the event of a change in time of broadcast. If you set
PDC
to
ON
, your VCR will be turned on not by its own timer but by a signal
transmitted by the broadcaster. This means that if an advertised programme is
delayed, your VCR will still record it properly.
change stop time
Press
STOP
+
/
–
(number key
2
and
5
). You can
compensate for anticipated changes in schedule using this method.
serial recording
To set the VCR to record the same programme on a daily
(Monday-Friday) or weekly basis, press
DAILY
(number key
8
) or
WEEKLY
(number key
9
) to turn the function on. Pressing the same key again turns the
function off. You will see your selection appear on the TV screen.
c apacit y
You can set this VCR to timer record up to eight programmes. If you
try to enter a ninth,
PROGRAM FULL
appears on the screen.
satellite receiver users
To timer-record a satellite broadcast using the
VIDEO Plus+ system:
• You cannot set
PDC
to
ON
.
• You cannot timer-record the satellite broadcast received on the channel
position ‘0’ by the satellite receiver.
• Leave the satellite receiver’s power on.
Return to Normal Screen
Press p or
.
PROGRAM COMPLETED
appears on the TV screen for
about 5 seconds, then the normal TV screen appears.)
Check the Results
Press
. The VIDEO Plus+ Program screen
appears.
Make sure that the preset number displayed is the
one that you want. If it is incorrect, the wrong
programme will be recorded.
errors
If the PlusCode number you entered is
invalid,
ERROR
appears on the TV screen.
– –:– –
AUDIO
0000
VPS/PDC
3
5
3
2 4
30 SEC
?
PR
PR
PR
ENTER
LP00000-000
VCR/TV
i
VPS/PDC
ENTER
i
-P1-
k
: OK
PLUSCODE NO.
START
21:00
SP
DATE
25.12
56781234
STOP
22:00
VPS/PDC OFF
TV PROG
1
BBC1
-P2-
HR-S6965EK-EN/p21-28
2/19/03, 07:55 PM
22