JAI EN Series Cameras TS(C)-4032EN User Manual
Page 16
EN Camera Series
16
Tutorial
Figure 4. Camera Properties
3.1.3 Live Image Capturing/Focusing
Click the “Video” button.
Highlight the icon of the camera you want to see. Click the
“Full Size” and “Live” video buttons. You will now see a live
video image. The live image is generated by an internal
trigger mechanism inside the EN camera. This internal trigger
is independent of either FTP or message-based TCP image.
Also, during live image display, Flash is disabled at nighttime.
The “Snap” button captures only a single video image. The “Freeze” button disables the “Live”
image option.
Use the “Live” or “Snap” buttons only while the camera is being set up, for those occasions you
want to see the maximum frame rate of the video image to focus the lens.