JVC KD-G401 - Manual (Page 7)

7
ENGLISH
Setting the clock
You can also set the clock system to either
24 hours or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 31.)
2
Set the hour.
1 Select “CLOCK H” (hour) if not shown on
the display.
2 Adjust the hour.
1 2
3
Set the minute.
1 Select “CLOCK M” (minute).
2 Adjust the minute.
1 2
4
Set the clock system.
1 Select “24H/12H.”
2 Select “24H” or “12H.”
1 2
5
Finish the setting.
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the button, the
display changes as follows:
• During AM and FM non-RDS station
operation:
• During FM RDS Station operation:
• During disc operation:
Notes:
• While playing a conventional CD, “NO NAME”
appears for the disc title/performer and the track
title.
• For indication change while playing a CD Text or
an MP3 disc, see also pages 22 and 25.
• During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns off.
Frequency Clock
Elapsed
playing time
Clock
Disc title /
performer
Track title
Station name Station frequency
Programme type Clock
EN05-07_KD-G401[E_EX_EU]f.p65 7/11/03, 7:12 PM 7