Jensen Tools VM9511TS - Manual (Page 27)

25
VM9511TS
DVD/DISC SETUP MENU
NOTE: A DVD/disc must be loaded into the mechanism
and playing prior to accessing the DVD Setup menu.
While the DVD/disc is playing, press the DVD SETUP
button (30) on the remote to access the DVD Setup
menu.
In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, “AUDIO”
“SPK CONFIG”, “PRO-LOGIC II”, and “RATING” (parental
lock) are available for setup. These operations can be
performed using the remote control or joystick controls.
Accessing the DVD Setup Screen
Setup can be performed by pressing the dedicated button on
the remote control, or by pressing the SRC button (15) on the
front panel.
For system settings, press the DVD SETUP button (30) on
the remote control or touch “SETUP” on the screen to enter
the “SETUP” menu. “SYS SETUP” is highlighted in green.
To access the “DVD SETUP” Menu, press the V button (7) on
the remote control to choose the “DVD SETUP” option, then
press the >/|| button (18), or just touch “DVD SETUP” on the
screen. “LANGUAGE” is highlighted in green.
NOTE: Once the DVD setup is complete, the settings are
memorized. To return to the factory default settings,
press the RESET button (25) on the front panel.
Accessing a Menu
To access a menu (LANGUAGE, VIDEO, AUDIO, SPK
CONFIG, PRO-LOGIC II, or RATING), press the direction
buttons on the joystick (16, 17, 18, 19) or remote control (14,
17, 18, 19, 22) to highlight the desired menu in green. You
can also touch the on-screen menu selection to access that
menu.
Selecting a Feature for Adjustment
Once inside a menu, press the >> or << buttons (14, 22) on
the remote control or the /\ or V buttons (18, 19) on the
joystick to select the feature to be adjusted.
Adjusting a Feature
1.
Enter the option field for the feature you want to adjust
by pressing the >/|| button (18) on the remote or by
pressing the ENTER (joystick) button (20) on the unit. A
submenu appears in a second row with the selected
option highlighted in light blue.
2. Select a new value by pressing the >> or << buttons (14,
22) on the remote control or the /\ or V buttons (18, 19)
on the joystick.
3. Confirm your selection by pressing the << , |<<, or >>|
buttons (22, 17, 19) on the remote control, or the < or >
button (16, 17) on the joystick. The new value is
highlighted in light blue and setup is complete.
LANGUAGE Menu
If a DVD supports more than 1 Subtitle or Audio language, all
the languages are available for selection during playback. If
the selected language is not supported by the DVD, then the
default language is used. During playback, press the
SUBTITLE (9) or AUDIO (5) button on the remote control to
change the language directly. This will not affect the DVD
menu settings.
VIDEO Menu
NOTE: For standard discs not formatted for
“widescreen”, use of the 16:9 aspect ratio will result in
image distortion.
Table 13: LANGUAGE Menu Features
Setting Options Function
Subtitle English Select the default language in which
you would like subtitles (if applicable) to
be displayed.
Auto
Off
DIRECTION BUTTONS
Audio English Select the default language in which
you would like audio (when optional) to
be played.
DVD Menu English Select the default language in which
you would like the DVD menu (if appli-
cable) to be displayed.
BACK Return to previous menu.
Table 14: VIDEO Menu Features
Setting Options Function
TV Shape
(Aspect
Ratio) 4:3 PS With 16:9 display, the left and right sides
are cut off.
4:3 LB With 16:9 display, the top and bottom are
cut off.
16:9 Image is presented in wide view with a
16:9 aspect ratio.
Angle
Mark On Angle indicator (if applicable) is shown.
Off Angle indicator is not shown.
View Mode Fill
Original
H Fit
W Fit
Fit to
Scrn
Pan Scan
BACK Return to previous menu.
Table 13: LANGUAGE Menu Features
Setting Options Function