John Deere 5103E User Manual

Page 103

Advertising
background image

Service and Maintenance

NR25796,00002C5

–19–26FEB07–2/3

Every 10 Hours

Check engine oil level

Check coolant level

Drain water and sediment from fuel filter

Lubricate tie rod ends

1

Lubricate steering spindles

1

Lubricate front axle pivot pin(s)

1

Lubricate rear axle bearings

1

Lubricate clutch pedal and right hand brake pedal.

1

Lubricate cluch / brake shaft.

1

IMPORTANT: External lubrication is not required

for oil type rear axle

Every 50 Hours

Check transmission-hydraulic system oil level

Clean and check battery

Inspect all tires

Lubricate front axle pivot pin(s)

Lubricate steering spindles

Inspect tractor for loose nuts and bolts

Lubricate clutch pedal and right hand brake pedal.

Lubricate clutch / brake shaft.

First 100 Hours

Change engine oil and filter

Replace transmission-hydraulic filter

Every 250 Hours

Service air cleaner

Change engine oil and filter

Clean and check battery

Inspect and adjust alternator/fan belt

Lubricate 3-point hitch

Check neutral start system

Check clutch pedal free travel

Check brake pedal adjustment

Replace filter inserts ( primary and secondary
alternatively)

IMPORTANT: Never replace primary and

secondary inserts simultaneously

Every 500 Hours

Replace transmission-hydraulic filter

Every 600 Hours

Clean engine crankcase vent tube

Repack front wheel bearings

Check and tighten all hoses and hose clamps

Check cooling system for leaks

Lubricate rear axle bearings

Check engine idle speeds

Have your John Deere dealer:
-Check front axle pivot pin
-Adjust engine valve clearance
Inspect fuel injectors

IMPORTANT: External lubrication is not required

for oil type rear axle

First 1100 Hours

Change transmission-hydraulic oil and filter

Every 1250 Hours

Change transmission-hydraulic oil and filter

Clean transmission-hydraulic pickup screen

Annually

Change engine oil and filter

Replace air cleaner elements

1

Only necessary when operating in extremely wet and muddy

conditions.

90-3

022607

PN=101

Continued on next page

Advertising
This manual is related to the following products: