Adjusting toe-in, Wheels, tyres and treads – John Deere 5103E User Manual
Page 88
Advertising
Wheels, Tyres and Treads
PY80265,05GO890
–19–04JUL06–1/1
Adjusting Toe-In
PY4882
–UN–12JUN06
Powered Axle
PY4148
–UN–26AUG04
Non-Powered Axle
A—Tie Rod Lock Nut
B—Tie Rod Tube
1. Loosen lock nut (A) on tie rod.
2. Adjust tie rod equally by rotating tube (B) to lengthen
or shorten tie rod. Adjust toe-in to 3 to 6 mm for
CARRARO front axle and 0—2 mm for DANA front
axle.
3. Tighten bolt to specification. Do not overtighten as
damage to the tube may occur.
.
Specification
Tie Rod Jam Nut—Torque
90 N•m (66 lb-ft)
..............................................
Toe-In Value Chart
Make
Toe-In Value
DANA FRONT AXLE
0-2 mm
CARRARO FRONT AXLE
3-6 mm
75-10
022607
PN=86
Advertising