JVC XV-511BK EN - Manual (Page 42)

Additional information
39
Additional
information
AV COMPU LINK remote control system
When you buy a separate TV, VCR, DVD player, receiver, or other components and connect them to each other, you
have to operate each component individually. JVC’s AV COMPU LINK remote control system meets the demand for a
system made up of single components and has the ease of operation of a single unit.
Connection and setup
Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.
• If you connect a DVD player with a television via AV COMPU LINK, set the DVD player’s AV COMPU LINK setting as
follows.
• When connecting with VIDEO-1 input terminal of the television: DVD2
• When connecting with VIDEO-2 input terminal of the television: DVD3
• If you connect a DVD player with a television and VCR via AV COMPU LINK, set the VCR’s Remote Control Code and
DVD player’s AV COMPU LINK setting as follows.
• When connecting with VIDEO-1 input terminal of the television:
DVD player’s AV COMPU LINK setting: DVD2
VCR’s Remote Control Code: B
• When connecting with VIDEO-2 input terminal of the television:
DVD player’s AV COMPU LINK setting: DVD3
VCR’s Remote Control Code: A
• If you connect a DVD player with a television and receiver via AV COMPU LINK, set the DVD player’s AV COMPU
LINK setting to DVD1.
Receiver DVD player
TV
DVD player
TV
To AV COMPU LINK (II or EX)
DVD player VCR (Video Cassette Recorder)
TV
To AV COMPU LINK
To AV COMPU LINK (II or EX)
• The DVD player’s AV COMPU LINK setting is operated in the “PREFERENCE” display. See page 37 for
operation.
• About the connection between the TV and the Receiver, refer to Receiver’s Instructions.
Additional information
IMPORTANT !
If you connect the component video output to your TV,
• set the DVD player’s AV COMPULINK setting to DVD1, and
• make the video/audio connection between the DVD player and your receiver using supplied audio/video cable
and do not make the S-VIDEO connection.