Jura Capresso IMPRESSA X9 - Manual (Page 9)

9
HARDNESS
Ⅲ Press P to save your setting (Fig. 5/E).
CONFIRMED
HARDNESS
Ⅲ Press EXIT (Fig. 5/K).
SELECT PRODU
9. Using a CLARIS plus filter cartridge
When using the CLARIS plus filter cartridge properly, decal-
cifying your machine will no longer be necessary. For more
information on the CLARIS plus filter cartridge refer to the
CLARIS plus brochure “CLARIS. Hard on limescale. Gentle
on your coffee machine.”
9.1 Installing the filter
Initial installation of a CLARIS plus filter cartridge needs
to be carried out by a service technician. Please contact your
service partner.
Ⅲ Change the filter as described in Chapter 21.
10. Coffee
10.1 Making coffee/espresso/ristretto
COFFEE READY
Ⅲ Place a cup under the height-adjustable dual spout (Fig. 6) and
press a product key of your choice. The pre-brewing process
(I.P.B.A.S.
© ) moistens the coffee powder, briefly interrupts the
flow of hot water and then begins with the actual brewing
process. The following example shows how to make 1 espresso.
1 ESPRESSO
A bargraph indicates the duration of the espresso brewing
process.
To stop the brewing process prematurely, press any of the
coffee keys. For a perfect frothing result, adjust the dual
spout (Fig. 6) to the size of your cup.
10.2 Making cappuccino/macchiato
COFFEE READY
Ⅲ Place a cup under the height-adjustable dual spout (Fig. 6) and
press the Macchiato key (Fig. 1/G). Make sure the milk hoses
(Fig. 8/A) have been dipped into the milk. The following exam-
ple shows how to make 1 macchiato.
MACCHIATO
Ⅲ The IMPRESSA X9 starts by making the frothed milk.
The lower of the two bargraphs indicates the duration of the
milk frothing process.
MACCHIATO
Ⅲ Last of all the machine brews the coffee.
The upper of the two bargraphs indicates the duration of the
coffee brewing process.
Press any of the product keys to stop the frothing or the
brewing process prematurely.
The milk system is rinsed automatically 10 minutes after dis-
pensing milk. You will hear an acoustic signal before the
rinsing cycle starts.
10.3 Making milk coffee
COFFEE READY
Ⅲ Place a cup under the height-adjustable dual spout (Fig. 6) and
press the Milk Coffee key (Fig. 1/F).
MILK COFFEE
Ⅲ Coffee and milk are discharged into the cup simultaneously.
The upper of the two bargraphs indicates the duration of the
coffee brewing process.
Press any of the product keys to stop the frothing and the
brewing process prematurely.
The milk system is rinsed automatically 10 minutes after dis-
pensing milk. You will hear an acoustic signal before the
rinsing cycle starts.
10.4 Frothing milk
COFFEE READY
Ⅲ Place a cup under the height-adjustable dual spout (Fig. 6) and
press the Frothing key (Fig. 1/H). Make sure the milk hoses
(Fig. 8/A) have been dipped into the milk.
MILK FROTH
Ⅲ Your milk/frothed milk will be prepared.
A bargraph indicates the duration of the frothing process.
Press the frothing hos to stop the frothing process prema-
turely.
10.5 2x key
You can make 2 coffees in one brewing step by preselecting
the 2x key. Press the 2x key and then the coffee key of your
choice.
The milk products cannot be doubled.
COFFEE READY
Ⅲ Make 2 ristretti, espressi or coffees by pressing the 2x key
(Fig. 1/D) first.
COFFEE READY
E