JVC MX-KB1 MX-KB2 User Manual

Page 26

Advertising
background image

23

Using the Timers

Eng

lish

Using the Unit
You can set the time in the same way as for setting the Daily Tim-
er.

1

Insert a blank or erasable tape into the Deck
B and wind past the tape leader.

2

Press the CLOCK/TIMER button until “ON
TIME” immediately after “REC TU” appears on
the display.

Each time you press the button, the display changes as follows:
DAILY

= ON TIME = REC TU = ON TIME* = Clock

setting display

= Canceled = (back to the beginning)

*: This item should be selected for the REC Timer setting.

Then, the System enters ON-time setting mode. The current
ON time appears on the display and the hour digits, “REC” in-
dicator and the timer indicator (

) blink.

3

Setting the ON time you want the System to
turn on.

1. Press the

4 or ¢ button to set the hour, then press the

SET button.

2. Press the

4 or ¢ button to set the minute, then press the

SET button.

“OFF TIME” appears and then the System enters OFF-time
setting mode. The current OFF time appears on the display,
and the hour digits blink.

4

Setting the OFF time you want the System to
turn off.

1. Press the

4 or ¢ button to set the hour, then press the

SET button.

2. Press the

4 or ¢ button to set the minute, then press the

SET button.

The System enters Preset Station Entering mode.

5

Select the preset station for recording.

1. Press the

4 or ¢ button to set the band (TUNER FM or

TUNER AM), then press the SET button.

2. Press the

4 or ¢ button to set the preset number, then

press the SET button.

“SET OK” appears on the display. The “REC” indicator stops
blinking and remains lit.

6

Press the

STANDBY/ON button to turn

off the System, if necessary.

To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.

When the timer ON-time comes:
• When the timer ON-time comes, the System automatically

turns on. The station you have set is played. The Timer indica-
tor (

) blinks during timer operation.

To stop timer recording, press the

7 button.

• When the timer OFF-time comes, the System automatically

turns off.

• If the System is already on when the timer ON-time

comes, the REC Timer does not work.

Turning the REC (Recording) Timer On and Off

Once you have set the REC Timer to record a source, the timer set-
ting is stored in memory. So, though the REC Timer turns off once
it is used, you can recall it at any time.

To cancel the REC Timer temporarily:

1

Press the CLOCK/TIMER button on the Unit
repeatedly until “REC TU” appears on the
display.

2

Press the CANCEL button on the Unit.

“CANCEL” appears and both the Timer indicator (

) and the

“REC” indicator go out.

To activate the cancelled REC Timer:

1

Press the CLOCK/TIMER button on the Unit
repeatedly until “REC TU” appears on the
display.

The Timer indicator (

) and the “REC” indicator blink on

the display.

2

Press the SET button on the Unit.

“SET OK” appears on the display. The Timer indicator (

)

and the “REC” indicator remain lit, and the display returns to
the original display.

• If the System is unplugged, or a power failure occurs,

the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.

MX-KB2[UW].book Page 23 Friday, May 14, 2004 5:46 PM

Advertising