Tuning into a preset station, Selecting fm reception sound – JVC KD-MX3000 User Manual
Page 9
9
ENGLISH
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 7
and 8.
1
Select the band (FM1, FM2, FM3 or AM) you
want.
2
Select the number (1 – 6) for the preset station
you want.
To change the display information while receiving a station
Press DISP. Each time you press the button, station frequency and the station name you have
assigned (see page 29) appear alternately on the display.
DISP
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RPT (Mono/Repeat) while listening to an FM stereo broadcast. “MONO” appears
on the display and the sound you hear becomes monaural but reception will be improved.
To restore the stereo effect, press the same button again.
2
1
FM/AM
7
8
9
10
11
12
1
2
3
4
5
6
MO
RPT
Lights up when receiving an FM broadcast in stereo.
Station Frequency
Station Name
EN 06-09 KD-MX3000 [J]/F
98.10.19, 6:35 PM
9