Pg. 45 – JVC GR-DF420 User Manual

Page 45

Advertising
background image

EN

45

TROUBLESHOOTING

MasterPage: Start_Right

RE

FE

REN

C

ES

Appears for 5 seconds after power is turned on if
the lens cap is attached or when it is dark.

Appears if Audio Dubbing is attempted on a
blank portion of a tape. (

੬ pg. 41)

● Appears if Audio Dubbing is attempted on a

tape recorded in the LP mode. (

੬ pg. 41)

● Appears if Audio Dubbing is attempted on a

tape recorded in 16-BIT audio. (

੬ pg. 41)

● Appears if A. DUB (D) on the remote control is

pressed when the erase protection tab is set to
“SAVE”. (

੬ pg. 41)

Appears when pictures recorded in the HDV
format are detected. The pictures in the HDV
format cannot be played back with this
camcorder.

The error indications (01, 02 or 06) show what
type of malfunction has occurred. When an error
indication appears, the camcorder turns off
automatically. Remove the power supply
(battery, etc.) and wait a few minutes for the
indication to clear. When it does, you can
resume using the camcorder. If the indication
remains, consult your nearest JVC dealer.

The error indications (03 or 04) show what type
of malfunction has occurred. When an error
indication appears, the camcorder turns off
automatically. Eject the cassette once and re-
insert it, then check if the indication clears.
When it does, you can resume using the
camcorder. If the indication remains, consult
your nearest JVC dealer.

LENS CAP

A. DUB ERROR!

A. DUB ERROR!
<CANNOT DUB ON A LP RECORDED
TAPE>
<CANNOT DUB ON A 16BIT RECORDING>
<CHECK TAPE’S ERASE PROTECTION
TAB>

HDV

UNIT IN SAFEGUARD MODE
REMOVE AND REATTACH BATTERY

UNIT IN SAFEGUARD MODE
EJECT AND REINSERT TAPE

GR-DF420PAL.book Page 45 Tuesday, January 18, 2005 8:52 PM

Advertising