JVC MINI VIDEO PRINTER GV-HT1 - Manual (Page 36)

EN
35
Print Operations
5 SET THE VIDEO SOURCE TO PLAY-
BACK MODE
•For details, refer to the instruction manual
supplied with the video source.
6 PRESS THE MEMORY BUTTON
WHEN THE IMAGE YOU WISH TO
PRINT APPEARS
•This action stores the image you wish to print.
•The message, “Please wait ...” is displayed
on the LCD panel while the image is being
stored.
•The memory icon indicates the
following conditions.
on: image data has been stored in the printer
off: no image data is stored in the printer
7 INSERT PRINTING PAPER IN PAPER
OUT/MANUAL FEED SLOT
•Slide in the printing paper with the printing
surface up as far as it will go without curling it.
•Unless the printing paper is inserted straight,
it will cause a paper jam.
8 PRESS THE PRINT BUTTON
•Gently press the edge of the printing paper
into the printer.
•Release the paper when it is pulled into the
printer.
•The printer starts printing the stored image.
•The message, “Please wait ...” is displayed
on the LCD panel. Then the printer icon
appears.
•The printer icon indicates the following
conditions.
on: image data is being printed
off: printing has been completed
NOTES:
•You can add a frame, produce multipix prints
or add special effects.
•To print the same image again, press the
PRINT button. One print is made each time
the PRINT button is pressed.
•To print a different image, perform operations
in steps 5 to 8.
MEMORY
SELECT
PRINT
SET
MENU
MEMORY
SELECT
PRINT
SET
MENU
Paper