JVC KD-NX5000- - Manual (Page 92)

ENGLISH
92
Menu items Selectable settings (Initial setting)
Setup
]
Disc
*3
D. Audio Output Select the signal format to be emitted through the
DIGITAL OUT (Optical) terminal on the rear. For details,
☞ [106].
Off: No signal is output from the terminal.
PCM Only: Select this when connecting an amplifier or a
decoder incompatible with Dolby Digital, DTS or MPEG
Audio, or connecting to a recording device.
Dolby Digital/PCM: Select this when connecting an
amplifier or a decoder compatible with Dolby Digital.
Stream/PCM: Select this when connecting an amplifier
or a decoder compatible with Dolby Digital, DTS, and
MPEG Audio.
Down Mix When playing back a multi-channel DVD disc, this setting
affects the signals reproduced through the LINE OUT jacks
(and through the DIGITAL OUT terminal when PCM
Only is selected for D. Audio Output).
Surround Compat.: Select this when you want to enjoy
multichannel surround audio by connecting an amplifier
compatible with Dolby Surround to this receiver.
Stereo: Normally select this.
D. Range Comp. You can enjoy a powerful sound at a low volume level
while playing Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded
software.
On: Select to always use this function.
DivX Registration This unit has its own Registration Code. Once you
have played back a disc in which the Registration Code
recorded, this unit’s Registration Code is overwritten for
copyright protection.
Video Output Format Select the format of video output according to the color
system of your external monitor.
• The color system of the unit’s display is also changed.
Picture quality on the main unit’s display may deteriorate
when you select PAL.
NTSC, PAL
KDNX5000_J.indb 92 KDNX5000_J.indb 92 23/1/07 7:01:00 pm 23/1/07 7:01:00 pm