JVC FS-GD6S - Manual (Page 17)

13
English Changing the Display Brightness
You can dim the display window.
* “AUTO DIM” does not work for CD/MP3.
Changing the Picture Tone
• While showing a playback picture on the TV, you can
select the preset picture tone, or adjust it and store your
own taste.
To select a preset picture tone
1 While playing, display VFP setting screen.
2 Select a preset picture tone.
To erase the screen, press VFP again while holding SHIFT.
To adjust the picture tone
1 Select “USER1” or “USER2.”
• Follow steps 1 and 2 explained on the left column.
2 Select a parameter you want to adjust.
3 Adjust the parameter.
4 Repeat steps 2 to 3 to adjust other parameters.
To erase the screen, press VFP again while holding SHIFT.
Adjusting the Audio Input Level
If the sound from the component connected to the
AUX jack is too loud or is not loud enough when changing
from another source to “AUX,” you can change the audio
input level through the AUX jack (without changing the
volume level).
While the “AUX” is selected as a source...
DIM1 Dims the display.
DIM2 Erases the display illumination.
AUTO DIM Erases the display illumination when
disc playback starts.*
• The display illuminates when
playback stops.
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings.
Remote
ONLY
1
DIMMER
DIM1 DIM2
AUTO DIM DIM OFF
(Canceled)
(at the same time)
Remote
ONLY
VFP
4
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
(at the same time) On the TV
NORMAL CINEMA
USER2 USER1
GAMMA Adjust if the neutral color is bright or
dark (–3 to +3).
BRIGHTNESS Adjust if the entire picture is bright or
dark (–8 to +8).
CONTRAST Adjust if the far and near positions
are unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
AUX LVL1 Select this when the sound is too loud (initial
setting).
AUX LVL2 Select this when the sound is not loud enough.
ENTER
TV CH
TV CH
ENTER
TV CH
TV CH
Remote
ONLY
AUX LVL1
AUX LVL2
SET
CANCEL
2 sec.
FS-GD6S[C].book Page 13 Thursday, March 17, 2005 11:13 AM