JVC GM-X50E - Manual (Page 34)

33
ENGLISH
PICTURE ADJ. (Picture adjustment): See page 16.
CONTRAST Adjusts the contrast of the picture.
BRIGHT Adjusts the brightness of the picture.
CHROMA* 1 Adjusts the color density of the picture.
PHASE* 2 Adjusts the color phase.
SHARPNESS Adjusts the outlines of the picture.
sub menu Displays the fine adjustment bar.
reset Resets the Picture Adjustment Menu settings to defaults.
SIZE/POSITION ADJ. : See page 17.
H SIZE Adjusts the horizontal screen size.
H POSITION Adjusts the horizontal screen position.
V SIZE Adjusts the vertical screen size.
V POSITION Adjusts the vertical screen position.
DOT CLOCK* 3 Adjusts to eliminate stripes or flickering. Use with “CLOCK PHASE.”
Normally, no adjustment is needed.
CLOCK PHASE* 3 Adjusts to eliminate stripes or flickering. Use with “DOT CLOCK.”
Normally, no adjustment is needed.
sub menu Displays the fine adjustment bar.
reset Resets Size/position Adjustment Menu settings to defaults.
FUNCTION SELECT: See pages 19 to 21.
COLOR TEMP. Adjusts the color temperature.
Use when the picture is reddish or bluish.
ASPECT* 4 Selects the horizontal to vertical ratio of the screen.
SIGNAL MODE* 5 • Selects a color system (NTSC, PAL, SECAM, N4.43 (NTSC 4.43), PAL60) when VIDEO A or
VIDEO B input is selected. Normally, set to “AUTO.”
• Selects a scan system—480i, 576i, 480p, 576p, 720/60p, 720/50p, 1080/60i (1035i), 1080/50i—
when COMPONENT input is selected. Normally, set to “AUTO.”
COMPO./RGB B Selects the usage of the COMPONENT/RGB B terminals either as the COMPONENT input
terminal or as the RGB B input terminal.
SYNC TERM.* 6 Adjusts the resistance of RGB B input terminals.
reset Resets the Function Selection Menu settings to defaults.
STATUS DISPLAY: See page 22.
Shows the input mode and signal type on the screen.
* 1 Adjustable when viewing the NTSC, PAL, or SECAM signal, or component signal.
* 2 Adjustable when viewing the NTSC signal or component signal.
* 3 Adjustable when RGB A or RGB B input is selected.
* 4 Not adjustable when viewing the following component signals—720/60p, 720/50p, 1080/60i (1035/60i), and 1080/50i. ( In
such a case, “ASPECT” does not appear on the display.)
* 5 Adjustable when VIDEO A, VIDEO B, or COMPONENT input is selected.
* 6 Adjustable when RGB B input is selected.
32-40_GM_X50EB.p65 04.7.13, 11:49 PM 33