JVC MX-V508T - Manual (Page 14)

10
English
Listening to Auxiliary Equipment
By playing the sound from the auxiliary equipment through the System, you can gain control over how the music or program sounds. Once the
connected equipment is playing through the System, you can apply the sound effects.
Make sure that the external equipment is properly connected to the System (See page 5).
1. After pressing the AUX button, “ AUX ” will appear on
the display. If the System is in Standby mode, the Unit
is automatically turned on to “
AUX ”.
2. Select a sound mode, if you wish (See page 9).
On the Unit/Remote Control
1. Set the VOLUME control to 0.
2. Press the AUX button.
3. Start playing the external equipment.
4. Adjust the
VOLUME control to the
desired level.
5. To cancel, change setting to any of the
System’s in-built sources, such as the
Tuner or CD Player
Unit/Remote Control Steps Explanation/Remarks
or
EN01-10;MX-D508T[U]/1 98.6.5, 9:37 AM 10