Jensen DV2007 - Manual (Page 13)

13
DV2007
1. Press FAST FORWARD to fast forward through the disc. Each time the button is
pressed, a new speed (2X, 4X, 8X or 16X) is selected.
2. Press PLAY to resume normal playback.
3. Press FAST BACKWARD to fast reverse through the disc. Each time the button is
pressed, a new speed (2X, 4X, 8X or 16X) is selected.
4. Press PLAY to resume normal playback.
8&9) FAST FORWARD& FAST BACKWARD( or )
Press BACK to skip backward to the beginning of the previous chapter.
14) NEXT( )
Press NEXT to skip forward to the beginning of the next chapter.
15) BACK( )
2) EJECT BUTTON ( )
Press the EJECT button to eject the disc or loading the disc.
17)PLAY/PAUSE ( )
1. Press PAUSE to pause playback.
2. Press PAUSE to single step forward to the next picture in the video (DVD and
VCD only).
3. Press PLAY to resume normal playback.
18) STOP( )
1. Press STOP to stop playback and show the Media Player screen. The player
memorizes the location where playback is stopped.
2. Press PLAY to resume playback from the location where playback is stopped (DVD,
VCD 1.1, VCD 2.0 and audio CD).
3. Pressing STOP twice is resume playback from the beginning of the disc.
The fast forward/backward speed may differ depending upon the disc.
Press REPEAT to “repeat chapter” . Press REPEAT again to repeat title, press third time to
disable current repeat mode.
32)REPEAT
VOLUME
MODE
AUDIO
DISPLAY
U EN M
+10
GOTO
MUTE
13. DVD OPERATION
DVD Operation - Remote control
9
15
13
3
30
34
35
32
40
12
8
2
11
14
17
16
18
37
31
38
24
39
36
27
33
19 29 ~
10 13 ~
7
10~13) UP/DOWN/LEFT/RIGHT BUTTON
Use these buttons to move cursor up/down/left/right.
16) OK
Use this button to confirm the selection.
19~29) NUMERIC BUTTONS
30A) DVD MENU
1. Press DVD MENU to invoke the menu screen included on the DVD disc (DVD only).
2. Press direction buttons to highlight a selected menu entry.
3. Press OK or PLAY to select the highlighted entry. If the highlighted entry indicates a
chapter or title, the disc will play from the selected spot.
30B). PBC (Play back Control) (For VCD disc only)
1. Press DVD MENU to enable/disable PBC functionality with VCD 2.0 discs.
PBC must be enabled for menu navigation.
2. Press a number on the number pad to select a track to play(VCD 2.0 only).
3. Press OK to make the selection.
4. Press DVD MENU for the main menu.
34)OSD BUTTON
1. DVD Video:
Press OSD button and the information display on the TFT is difference according to
this disc or files type.
2. VCD
1. When playback CD/MP3/WMA use for track number or File number direct access and
use when function need numeric Selection or Input, like in the Goto function,etc.
2. When playback DVD use when function need numeric Selection or Input, like in the
Goto function,etc
VCD2.0 00:00:12 00:13:39
Track 1/1
DVD Video 00:00:07 01:03:48
Title 1/1 Chaptel -/-
Audio 1/4 2 Ch
Subtitle Off
Angle 1/1 Bitrate 0.000Mbps