Jameco Electronics 487023U - Manual (Page 9)

Hardware Setup
Before installing the adapter, make sure you have
received all of the following items. If any of the
items are damaged or missing, contact your ven-
dor for replacements:
• USB Network Adapter
• USB Cable
• User Guide and Registration Card
• Program Disk
After unpacking the adapter, follow the steps
below to complete the installation.
Connecting the USB Network Adapter
The USB Network Adapter comes with a USB
cable. One end of the cable has a rectangular plug,
which is called an A-type connector. The other
end of the cable has a square plug, or B-type con-
nector.
The adapter has two ports. One is for RJ-45 UTP
network cabling -- it looks like and over-sized
phone jack. The other port looks like a square hole
-- this is the USB B-type port.
1. Make sure your PC is powered on and that you
are at the Windows 98 desktop.
2. Insert the cable’s square B-type plug into the
adapter’s B-type port.
5
Hardware Setup