JBL HTPS-400 User Manual

Page 5

Advertising
background image

5

Normal Mode:
Use this hookup for all non-
THX processors, including
Dolby* Digital, DTS

®

, Dolby

Pro Logic* or stereo.

Note: If using Dolby Digital or
DTS, set the crossover
frequency knob fully clockwise
to the maximum position. Make
sure the THX/Normal switch is
in the Normal position.
.

Subwoofer

Out

Receiver/Amplifier

OFF

AUTO

ON

OUT

IN

0

°

THX

180

°

NORMAL

MIN. MAX.

50Hz 150Hz

GREEN–ON

RED–STANDBY

LINE

PHASE

GAIN

CROSSOVER

EQ

Note: Some receivers/
processors have stereo
subwoofer outputs. In that
case, you must use a “Y”-
connector (not included) in
order to maximize the
subwoofer’s performance.

Advertising