JVC GET0635-003A - Manual (Page 72)

10 ENGLISH
Listening to the USB device
This unit can play MP3/WMA files stored in a USB device.
~
] Turn on the power.
Ÿ
All tracks will be played repeatedly until you change the
source or detach the USB device.
Caution on volume setting:
USB devices produce very little noise compared
with other sources. Lower the volume before
playing a USB to avoid damaging the speakers
by sudden increase of the output level.
If you have turned off the power (without
detaching the USB device)...
Pressing / SOURCE turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
USB input jack
USB memory
Changing the display information
Disc title/Album name/performer (folder name)*
= Track title (file name)* = Current track
number with the elapsed playing time
= Current track number with the clock time = (back
to the beginning)
* If the current disc is an audio CD, “NO NAME” appears.
If an MP3/WMA file does not have Tag information or <TAG DISPLAY> is set to <TAG OFF> (
14),
folder name and file name appear.
Stop playing and detaching the
USB device
Straightly pull it out from the unit.
“NO USB” appears. Press / SOURCE to listen to
another playback source.
You can operate the USB device in the same
way you operate the files on a disc.
(
9)
EN02-11_KD-R511_003A_3.indd 10 EN02-11_KD-R511_003A_3.indd 10 11/24/09 5:15:25 PM 11/24/09 5:15:25 PM