Jacuzzi Riva 6 Whirlpool Bath and Soaking Bath B685 - Manual (Page 2)

Riva
®
6
WhiRlpool Bath
technical Specifications
DimenSionS
72” L x 42” W x 20-1/2” H
(1829 mm) L x (1067 mm) W x (521 mm) H
DRain/oveRfloW
A: 16” (406 mm) B: 11-1/2” (292 mm)
Cutout
Template Provided Part Number: P186000
total Weight
B690, N274: 871 lb (395 kg) / 42 lb/sq. ft. (203 kg/m
2 )
B685: 840 lb (381 kg) / 40 lb/sq. ft. (195 kg/m 2 )
opeRating gallonage
62 U.S. Gal. (235 Liters)
Max. 77 U.S. Gal. (291 Liters)
pRoDuCt Weight
B690, N274: 105 lb (48 kg)
B685: 74 lb (34 kg)
SkiRt mounting
Not Available
eleCtRiCal SpeCifiCationS moDelS B690, n274 only
Requires a dedicated gfCi protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
heateR (optional) moDelS B690, n274 only
Requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N S750000
© 2008 Jacuzzi Whirlpool Bath • 14525 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStallation noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#FS07-000 05/08
n274 Riva™ 6 Whirlpool Bath, Right Hand
B690 Riva™ 6 Whirlpool Bath, Left Hand
B685 Riva™ 6 Bath
• Right and Left Hand Drain Location
• Accessories / Hardware:
4 XHTC Jet Trim Kit: #D095
2 X BMH Jet Trim Kit: #J869
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable: #8730
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze
Riva
®
6
SoakeR Bath
Electrical Components and Electrical Specifications do not apply
to non-jetted baths.
72"
21"
42"
2"
14" x 4"
11-1/2"
Motor
12" H x 18" L
Service Access
6-7/8"
SIDE VIEW
W
H
2''
L
END VIEW
DRAIN/OVERFLOW
A
B
product Shown: Riva™ 6 Whirlpool Bath
left hand Shown model: B690
* Measurements inside unit represent
cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.