Using the cassette deck (listening to a tape), Playing a tape – JVC CA-MXKB1 User Manual

Page 19

Advertising
background image

16

Using the Cassette Deck (Listening to a Tape)

The Cassette Deck allows you to play, record, and dub audio tapes.
❏ Listening to type I tape is suitable for this Cassette Deck.

One Touch Play

By pressing the TAPE A

3 or TAPE B 3 button, the System will

come on, and if a tape is in the deck, it will start to play. If no tape
is loaded, the operation is ignored.

Playing a Tape

You can use either Deck A or Deck B at a time for playback.

1

Press the

0

PUSH OPEN part for the deck

you want to use.

2

When the cassette holder opens, put a cas-
sette in, with the exposed part of the tape
down, toward the base of the Unit.

The tape will travel from the left to right.

• If the cassette holder does not open, turn the System off,

then back on and press the

0 PUSH OPEN part again.

3

Close the cassette holder gently.

When both Deck A and Deck B contain a tape, the last deck to
have a tape inserted is selected.

4

Press the TAPE A

3

or TAPE B

3

button.

The selected Deck appears (for example, TAPE-A) and the
Deck indicator “A” or “B” lights up on the display.
The Tape indicator (

3) lights up on the display and the tape is

played back.
The Cassette Deck automatically stops when one side of the
tape has finished playing.

To stop playing, press the

7 button.

To remove the tape, stop the tape, and press the

0 PUSH

OPEN part to open the Cassette Holder.

To Fast-Wind a Tape

During playback or in Stop mode, press the

¡ (FF) button on the

Unit to fast-wind the tape onto the right side of the cassette without
playing. (You can also use the

¢/¡ button on the Remote

Control.)
During playback or in Stop mode, press the

22 (REW) button on

the Unit to fast-wind the tape onto the left side of the cassette with-
out playing. (You can also use the

4/22 button on the Remote

Control.)
• The Cassette Deck automatically stops when one side of the

tape has finished playing.

❏ During fast-winding the tape, you can change the tape travelling

direction by pressing the

¡ (FF) or 22 (REW) button.

TAPE B

3

¡

* When the System is in use, the display shows other items as well.

For simplicity, we show here only the items described in this section.

22

4/1

TAPE A

3

¢/¡

7

7

TAPE A

3

Deck indicators

3: Tape indicator

0 EJECT

(Deck A)

0 EJECT

(Deck B)

TAPE B

3

The use of tapes longer than 120minutes (including
120 minute tapes) is not recommended, since char-
acteristic deterioration may occur and these tapes
easily jam in the pinch-rollers and the capstans.

Tape travelling direction

MX-KB2[B].book Page 16 Wednesday, April 28, 2004 2:16 PM

Advertising