Jacuzzi Duetta 6042 Pure Air Bath GA20 - Manual (Page 2)

Duetta
™
6042
pure air® Bath
technical Specifications
DimenSionS
60” L x 42” W x 26” H
(1524 mm) L x (1067 mm) W x (660 mm) H
Drain/overflow
A: 18.4” (467 mm) B: 11” (279 mm)
Cutout
Template Provided Part Number: DA09000
total weight
999 lbs (502 kg) / 57.1 lb/sq. ft. (279 kg/m
2 )
operating gallonage
Min. 53 U. S. Gal. (200 liters)
Max. 83 U.S. Gal. (314 liters)
proDuCt weight
160 lbs (73 kg)
Skirt mounting
Not Available
eleCtriCal SpeCifiCationS
requires a dedicated gfCi protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
heater (StanDarD)
No water heater is available on this unit. Blower has integral air heater.
© 2008 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStallation noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
#GD77000 01/08
ga20 Duetta™ 6042 Pure Air® Bath, Right Hand
• Center Drain Location
• Accessories / Hardware:
Sch 40, Rotary Drain Kit: #DA34
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
product Shown: Duetta™ 6042 pure air® Bath
right hand model: ga20
* measurements inside unit represent cutout in
floor to allow for drain/overflow.
minimum Service access dimensions given.
11.04"
60"
42"
30"
3.84"
13" x 4"
2"
12" H x 24"
L
Service Access
Blower
END VIEW
H
W
SIDE VIEW
L
1/2"
(13 mm)
(Blower)
DRAIN/OVERFLOW
A
B