JVC RX-5022VSL - Manual (Page 19)

17
Tuner Operations
MEMORY
L C
S.WFR
LS RS
CH-
S
LFE
SPK AUTO MUTING TUNED STEREO
VOLUME
ANALOG
R
FM/AM
L C
S.WFR
LS RS
CH-
S
LFE
SPK AUTO MUTING TUNED STEREO
VOLUME
ANALOG
R
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to receive or noisy, you can
change the FM reception mode while receiving an FM broadcast.
• You can store the FM reception mode for each preset station (see
page 16).
1
While listening to an FM station, press FM
MODE.
• Each time you press the button, the FM reception mode
alternates between “AUTO” and “MONO.”
AUTO : Normally select this.
When a program is broadcasted in stereo, you will
hear stereo sound; when in monaural, you will
hear monaural sounds. This mode is also useful to
suppress static noise between stations. The AUTO
MUTING indicator lights up on the display.
(Initial setting)
MONO : Select this to improve the reception (but stereo
effect will be lost).
In this mode, you will hear noise while tuning into
the stations. The AUTO MUTING indicator goes
off from the display. (The STEREO indicator also
goes off.)
To restore the stereo effect
Select “AUTO” in step 1.
4
Press MEMORY again while the
selected channel number is flashing
on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
5
Repeat steps 1 to 4 until you store all the stations
you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.
To tune in a preset station
On the front panel:
1
Press FM/AM to select the band
(FM or AM).
The last received station of the selected band
is tuned in.
• Each time you press the button, the band
alternates between FM and AM.
2
Press FM/AM PRESET UP/ DOWN
until you find the channel you want.
• Pressing FM/AM PRESET UP increases
the channel numbers.
• Pressing FM/AM PRESET DOWN
decreases the channel numbers.
From the remote control:
1
Press FM/AM to select the band (FM or
AM).
The last received station of the selected band is
tuned in and the10 keys now work for tuner operation.
• Each time you press the button, the band
alternates between FM and AM.
2
Press 10 keys to select a preset
channel number.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10,
then 10.
FM/AM PRESET
UP
DOWN
L C
S.WFR
LS RS
CH-
S
LFE
SPK AUTO MUTING TUNED STEREO ANALOG
R
L C
S.WFR
LS RS
CH-
S
LFE
SPK TUNED ANALOG
R
TEST
EFFECT
MENU
ENTER
CENTER
REAR L
SUBWOOFER
REAR R
1
4
7 /P
10
2
5
8
0
3
6
9
10
100 RETURN
FM MODE FM MODE
On the front panel From the remote control
FM/AM
EN08-17.RX-5020/5022V[J]_f 01.12.7, 8:49 AM 17